About Daniel Kulp

Daniel Kulp · 03-01-2017

I am trying to create a ring down(PLAR) (125-9603) to dial an extension (125-9604) that appears on a phone external to the Cisco system. I have created a Partition, a CSS, and a translation pattern that is set up to dial to the external number(125-9...

Daniel Kulp · 07-11-2017

this is a pretty good video on how to do a search and modify on specific phones. he is a little had to understand but there are subtitles. https://www.youtube.com/watch?v=KpnfJ2JfLzs

Daniel Kulp · 03-16-2017

I had an issue similar to this when i was adding SIP phones and using SIP dial rules on the instruments. What I ended up having to do was adjust the rules so it only effected the keys that I needed the dail rules for

Daniel Kulp · 03-16-2017

So the Issue turned out to be a SCCP / SIP issue. up to this point all the phones we had programmed have been SCCP but with he 8841's we went with SIP. So in addition to the regular setup of a PLAR you also need to set up SIP dial rules for the ph...

Daniel Kulp · 03-02-2017

OK so i figured out my issue i had the provide outside dial tone checked in my translation pattern. I also figured out that i needed the Directory number information to be in my PT_internal but the directory number settings CSS to be My PLAR CSS. t...

Member Since	‎03-01-2017 10:29 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

PLAR / Ringdown to external number 8841 Issue - Fixed

this is a pretty good video

I had an issue similar to

So the Issue turned out to be

OK so i figured out my issue