The router will only advertise routes that are in its routing table. So if the route is in the topology table but not in the routing table, then router won't advertise it to its peers.Another thing is that more than one office has experienced this. I...
That command is used when you want to translate the outside address for connection coming in. In this case, that is not required because we want to translate the ip address of the internal web server because the ip address of the server is not global...
Mike,Are you sure what you have here is the complete config of your router? If so, is it behind another device?Sent from Cisco Technical Support Android App
Michael, that pool is for your dynamic nat, and does not have anything to do with the static nat for your server. Just make sure that whatever public ip you are using for your server is actually within the range of your public ips.You need to take in...