Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
netbios has been disabled on the University servers. I am also trying to use CIFS in the SSL WebVPN portal. it apprears that the CIFS is using port tcp/139. can we change that to use SMB on tcp 445
Hello: Is there a way to see the resources in network neighborhood after authenticating to the VPN 3015? We are using SecurID Cards for authenticating into the VPN.Or, do you have to authenticate to the WindowsNT Machine and use WinNT as your securi...
Hello: Does the Altiga client 2.5.2 consider all network traffic as being terminated at the outside interface of the cisco 3015? we have 100+ cisco routers which all run RFC1918 addressing. Most use 192.168.1.0 for their private network. Clients o...
Hello: We currently have a PIX Box. Our network is set up so that the PIX is the default gateway. When I add the Cisco 3015 I will put one interface on the inside (parallel to the PIX) and one interface on the outside (parallel to the PIX on the ou...
Where the documentation falls short is in actually Installing and Enrolling the newly acquired Microsoft CA into the VPN3000. All else is very clear but I believe that the VPN needs to be told of the new certificate in order for it to operate.
Regarding "the Static Route on the Router pointing to the Network that the VPN3015 will be using as pool of addresses", Where does that static route point to?1) PIX inside interface2) VPN (3015) inside interface
I'm trying to accompolish the following: I want it to terminate the VPN tunnels from the IRE or Altiga clients at remote sites. I've done this with the PIX but felt the 3015 would be more suited for the task than the PIX. Those terminated tunnels w...
