Hi All, I was wondering what happens when the log collector fails in a primary-secondary setup.Say i have a pair of ACS 5.2 and configured for primary and secondary setup. and the log collector is the primary ACS. All network devices are confi...
Hi all, I was wondering if LMS 3.2 supports ACS 5.2 tacacs authentication? meaning that the LMS will register al the sub-applicatoins to ACS 5.2 like they do in ACS 4.0.Regards,Adrian
Hi all, i'm trying to configure acs 5.2 to LDAP external idenity store, when LDAP failes ACS 5.2 should use internal indenity store. I configured A sequence to use LDAP 1st then Internal and i shut off the link to the LDAP but ACS will not use intern...
Hi all, II know reverse-sticky command is not support in ACE, is there a equavient comment that i can ensure "reverse-sticky". I'm trying to loadbalance Cisco NAC servers with ACE. The NAC server LB concept should be like FWLB, i need the retu...
Hi is there any documentation or information on NAC server loadbalance by cisco ACE? I want to know typically how is the setup like and what is the traffic flow? is there a way to configure NAC clients to talk to the NAC directly after being loadbala...
Hi All, I have the same issue with APC UPS radius autnentication. When i login via the web browser to the UPS management page, it gives me a error saying that user creditial is wrong (I'm sure the username and password is correct) the ACS log ...
Hi jrabinow, Thanks for the reply, so just let me get this right. As of the current available software 5.2.0.26.3 if the indenity store sequence is configured and if the 1st identity store fails (in this case LDAP) the authentication s...
Hi Tiago, That does not work when access to the LDAP fails. I get the below error but does not move the authentication to the next identity store.24019 Connection error was encountered
Hi Gilles, Thank you for the reply. Does the solution needs to be in multiple ACE deployment? As i only have 1 ACE available can it be achived in a single ACE deployment?
Hmm Did u add the static routes back to your auth vlans on your NAC servers? you will need the NAC servers to reply back to the clients on the untrusted interface instead of the trusted.