Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I have a question about NAT'ing w/ route-maps. Will they work with standard access-lists? or do they have to be extended access-lists? I have tried standard access-lists and they don't seem to work, so I was wondering if they needed to be e...
Here is the situation: We have several branch offices within our organization that are connected to our main building via a 10mb ehternet fiber connections through a county network (they used to be 56k frame). Our main building has a 3620, while the ...
@ichernyshkov This worked for me also, upgrading to IOS 9.16.09.05.I was running 16.06.* variants and getting the "failed verification check" on ROMMON upgrade file 16.12(2r).
We finally got this going. It seems what worked for us was installing to the latest software for both the Azure Multi-Factor Authentication Server (v6.3.1) and on the ASA (we have a 5520, v9.1.6(8). Phonefactor now works on both SSL VPN and Anyconnec...
We currently having issues with Phonefactor. When you use the SSL VPN, the phone rings, you authenticate but it still fails getting this message Primary authentication failed. Access Denied" and then the phone rings two more times after the failure.I...
I was just wondering about the IPX. There is an outside office we connect to that uses IPX, but it is the only, and we will probably not use the VPN for it, but I wanted to know either way.As far as Netbios goes, it is the reason why we are looking i...
There are a few more things I'm having trouble understanding. If we create VPN tunnels between routers,can you create "virtual circuits" on a single interface on you main router for vpn, like you would create a point-to-point virtual cricuit for fram...
