Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Mike,Yes I got it working in the end. I am using this Cisco cable:SFP-H10GB-CU5M= 10GBASE-CU SFP+ cable, 5 meter (Version -02)You need to make sure it's version 2 of the cable and not version 1.Cheers,Hamish
Hi Ron,I have now tested two HP branded cables and the 'HP 3m C-series Passive Copper SFP+ Cable' which is supposed to be the same as the Cisco SFP-H10GB-CU3M= cable. None of these cables have worked. As suggested in a number of forums, I have config...
Hi Ron,Did you get the non-Cisco 10Gbps SFP+ cables to work on the 3750-X switches? I have tried 3 different HP cables, one of them a HP branded Cisco compatible cable (I read that this cable works on the Nexus). None of them seem to work on my 3750-...
Thanks Steve, that has helped a lot. Turns out that there is another bug on the Cisco 3750X-24T-S that has caused at least one of my ports to not come up after a reboot. Bug ID: CSCti75491 Some ports fail POST fail to come up. The work around is to ...
Hi Dan,Did you find out what was causing this issue? I have just setup a stack of 4 x Cisco 3750X's and are seeing the same issue when selecting STAT on the front panel. Each time I select STAT the switch shows that different ports have a link and th...
