About vivek NAGAR

vivek NAGAR · 05-08-2012

Hi Friends,as of now we are getting on SNMP Trap on our HPopenview moitoirng systembelow trap from WLC ciscoLwappAAARadiusReqTimedOut iNbsnAPIfDown 0x00 23 5d 0f 02 70 0 enable enable unknown access point namecan any one know about these trap.ThanksV...

vivek NAGAR · 07-10-2023

Hello Ishan, When you enable Standby Console , it will not impact any services Your will see below during normal setup standby console disable WLC1-stby# Standby console disabled when you enter the command WLC1(config)#redundancy WLC1(config-red)#...

vivek NAGAR · 11-19-2019

Hello ,You can check on below License bind with serial number and only be transfer with help of cisco licensing team, More over 3504 has RTU licensing https://www.cisco.com/c/en/us/support/docs/wireless/3504-wireless-controller/214106-licensing-on-3...

vivek NAGAR · 10-31-2019

when you are not seeing the SSID on client machine that time can you check the AP broadcast SSID or not via same command,

vivek NAGAR · 10-30-2019

As per attachment you have DHCP on WLC , do you use static capwap command to reach WLC? check the below blog for AP registration process will help you to understandhttps://mrncciew.com/2013/03/17/ap-registration/

vivek NAGAR · 10-30-2019

Policy look good as it allowed "MIC" accept , do you have access for AP via console ? is DHCP is giving option 43 WLC information or you statically define WLC information in AP ?

Member Since	‎05-18-2010 08:41 PM
Date Last Visited	‎07-17-2024 01:48 AM
Posts	11

User Statistics

User Activity

Alerts

Re: Enabling the Console of a Cisco WLC Standby Device in a Cluster

Re: Cisco WLC config migration from 2504 to 3504

Re: SSID not broadcasting properly

Re: AIR-CAP1602 not joined

Re: AIR-CAP1602 not joined