Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
We are using ISE 2.4. Switch C2960 and PSNs are in node group.
Posture Assessment with AnyConnect (AC) is deploying and having following error:
At 28/11/2019, 17h14’
One PC win 7 has problem that posture status is NotApplicabl...
Hi all,
We have PC - Switch - ISE - AD in these connectivity.
When PC connected to the Switch, PC is mapped into VLAN A.
In VLAN A there is only ISE doing the DHCP, DNS, Web servers...
When browser in PC goes to google.com, PC is redirected to ISE po...
Hi,We are doing the Posture assessment with PC <-> SF500 <-> ISE 2.4.We wants to use the SNMP COA Reauthenticate for posture assessment.on PC, we have AnyConnect running to check the posture.I would like to ask for the OID of SF500 for SNMP CoA reaut...
Hi all,
We have the same problem with ISE 2.4 too.
The posture assessment report to PSN is NOT stable. Some time it is the same in PC and ISE, other time, it is NOT. AnyConnect "says" compliance", ISE says "not applicable".
In case the root cause i...
Thanks for your advice.
Asking PaloAlto SE, I got the following answer:
- PA FW could use PxGRID to send to ISE quarantine request
- PA FW could get the user information from ISE indirectly with the help of a free tool MineMeld + PxGRID
Minh
Hi Jason and Salomon,Salomon has changed the Configuration SF500 as following:- in the interface where PC is connected in, change "dot1x authentication 802.1x MAC" to "dot1x authentication 802.1x" , i.e remove the option MAB authentication, keep just...
