Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,i'm tring to create a vPC peer-link between my 7000 & 5000.The 10G trunk is up between the Two but i cannot manage to mount the vPC peer-link.I'm wondering if this link is even possible, Cisco doesn't talk about a connection like that.Here is some...
Hi,I'm starting studing Nexus, in my lab i only have a 7k and 5k. Is it possible to create a vPC link between those two?I tried but i received the error: Nexus 7000Nexus_7000(config-if)# vpc peer-link ERROR: Operation failed: [Interface is not capabl...
No, in the HSRP case you can't do that.You'll have to restore it via a standard method:*TFTP (if your version allows it)*copy from compact flashIt depends of the equipement.-Guillaume
Hi Giorgos,you're right I missunderstood But by the way i tried the command: Switch(config)#conf-reg 4142 but it doesn't exist and i havn't found the equivalent command furthermore if i do a sh version, my configuration register is 0xF. So That'...
Hi,I tried with my 3560 and here is the result:-Erase startup-delete flash:vlan.dat-reload Model SW Version ---------------- ------------------- WS-C3560-24PS 12.2(50)SE5 ...
Hi,i havn't tried exactly this kind of operation.But yes it will works fine. Otherwise You will have to put the same IOS later from the CLI of your active supervisor if you want your switchover to work correctly. With two different IOS image your re...
Hi,for now what we know is that you have a routing problem so there is no reference guide to solve your problem unless you give us some information."love paint" Tell me if i'm wrong but this is your Network. Do you have a full ip connectivity between...
