About Fawadnoorkhan_2

Fawadnoorkhan_2 · 03-09-2012

Can a firewall show more XLATE created than CONNECTIONS?Is that theoretically possible to have more XLATEs than the total number of connections?. the reason I am asking, that assuming a Cisco 5510 has have maximum 130,000 total connections, however x...

Fawadnoorkhan_2 · 12-02-2015

Thank you Reza, it helped me a bunch. I was unable to find it using the regular means. The link is still accurate but the table got shifted. The needed information is in Table 17: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/verified_...

Fawadnoorkhan_2 · 03-12-2012

The reason they are not available on CCO is that they are not suitable for general use. A lot of fixed releases are available but only a Cisco TAC or SE can open a link for you depending on the situation. The bug ID you have provide is for 8.4 code o...

Fawadnoorkhan_2 · 03-10-2012

have you tried my above recomendation?also have you verified that your image is K9... a show ver would help

Fawadnoorkhan_2 · 03-10-2012

while, this could be a very specific scenario based on your configuration and the code versions.. what does Cisco TAC say?I have seen something similar with ASA code 7.2 when ESMTP inspection was causing all sorts of issues.

Fawadnoorkhan_2 · 03-10-2012

what does your NAT configuration looks like. its difficult to tell from the configurations you have provided.access-list aclDAVE-SERVER extended permit tcp any eq 51088 host 192.168.69.100 eq 51088access-group aclDAVE-SERVER in interface outsideasa55...

Member Since	‎05-27-2009 05:11 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	11

User Statistics

User Activity

xlate count and connection count

Thank you Reza, it helped me

Continuous crashes with ASA 8.2(5)22 on standby unit

Re: Help on cisco ASA 5505 and enable ASDM!!!

Continuous crashes with ASA 8.2(5)22 on standby unit

PAT on ASA5505