About klogan

klogan · 09-16-2010

After upgrading ACE module from A2(3.1) to A2(3.2) we started getting complaints about the ablity to upload a file in one of our applications. We are able to recreate the problem and noticed that when there is a failure, the ACE sends a TCP RST in bo...

klogan · 12-05-2005

I have two 6513s with an 802.1q trunk connecting them. Each switch has redundant Sup720s running in Native mode, IOS ver 12.2(18)SXF (they were initially running SXD3). A FWSM (ver 2.3(3), routed mode, single context) is in each switch, setup in fail...

klogan · 12-05-2005

I have two 6513s with an 802.1q trunk connecting them. Each switch has redundant Sup720s running in Native mode, IOS ver 12.2(18)SXF (they were initially running SXD3). A FWSM (ver 2.3(3), routed mode, single context) is in each switch, setup in fail...

klogan · 03-23-2004

I have DistributedDirectors that use the AS hop count as a metric for deciding which ip address to give out for a dns query. I have entered the following commands in an attempt to pad the AS entries for a particular AS, but it appears to be ignored. ...

klogan · 09-20-2010

Thanks for the reply Joel. You are correct we were experincing the noted bug. We opened a TAC case and worked with Jim Sirstin to identify that this was our problem. We implemented the suggested work around and it solved the problem. Here is the deta...

klogan · 12-20-2005

Thanks to the question asked by pallette, I ran across this; Field Notice: FN - 61935 - Catalyst 6500 Series and 7600 Series Service Module Incompatibility With Distributed EtherChannel and Packet Re-Circulation which references bug CSCee10005. I hav...

klogan · 12-19-2005

Hello pallette,Yes I am using DEC over three 6748 cards with DFCA modules.Thanks.Keith

klogan · 12-12-2005

I will have to get setup to record more data, but I do know the FWSM showed a ping request and a ping reply at the "inside" interface.I believe my problem is related to the IOS command "firewall multiple-vlan-interfaces" which I put in place to allow...

klogan · 03-31-2005

I have been having the same tcp connection timeout problems. It happens with several different PIX and FWSM units with different software versions. We have determined that it is a 90 second idle period that breaks the connection for the end user. The...

Member Since	‎03-23-2004 03:31 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	13

User Statistics

User Activity

ACE Exception during conversation

Problem with FWSM and L3 interface in same switch

Problem with FWSM and L3 interface in same switch

how to pad the as path in the bgp table?

Re: ACE Exception during conversation

Re: Problem with FWSM and L3 interface in same switch

Re: Problem with FWSM and L3 interface in same switch

Re: Problem with FWSM and L3 interface in same switch

Re: Unexpected timeout on connections