Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5505 that I am using to connect my contractors to via an inside interface, the outside interface is my private LAN. I have setup on our corporate Proxy server to allow traffic from my outside interface of my ASA to go to the internet w...
I have an ASA 5510 that I want to tell the ASA to boot from a config file I have uploaded in flash using the boot config disk0:/imagename but when the ASA reboots it still loads the default config, why is this? I do a show bootvar and it show the con...
We are looking at redesigning our current infrastructure, currently we have a Cisco 3060 concentrator that terminates all client and site-2-site tunnels and all traffic is directed to our corporate dmz interface (firewall) for the next hop. All extra...
I am in the process of migrating some of our call centers from ISDN circuits to VPN. Currently we have a Cisco 3060 concentrator as our head router and using a pix 501 from the one user call center. Each call center consists of one user a pix 501, bu...
I have a pix 501 configured in EZVPN mode with a dhcp range configured on the inside. How can I exclude an IP address within that range for instanceif my dhcp range is 10.10.10.1 - 10.10.10.6 and I want to reserve 10.10.10.5 for a printer how do I re...
You can either uncheck the option to allow users to choose all available connection profiles which doesn't stop them if they happen to find the name of the profile ( /name-of-profile) or you can use certificates for your iPads, this will prevent anyo...
don't think there is a solution for this because the ASA can't rewrite the URL unless the page is refreshed and that is not the case with Ajax application, you may want to try and use smart tunnels for that specific applicationSent from Cisco Technic...
Sounds like you have the Anyconnect premium license installed which means you can use both Anyconnect and clientless Anyconnect for 25 concurrent users.Sent from Cisco Technical Support iPad App
To answer your question, yes you can enable both Anyconnect clientless and Anyconnect client using the same certificate. Sent from Cisco Technical Support iPad App
Actually I have done lots of testing with Anyconnect Always-on and TND , seems to work well however you have to make sure of a few things for this to work correctly if you want the user experience to be smooth. Some of this information is leaking in ...
