Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,As you are aware, most cable modem's have a web management interface available on 192.168.100.1.I have a Cisco ASA 5505 and I was wondering what NAT/ACL/Routes I would need to add in order to reach that IP.Here's my config:hostname asadomain-name ...
I have a Cisco ASA 5505 that I've setup with an SSL VPN. This is for personal use, and I therefore don't have need for anything more than local authentication.I've created two group policies:group-policy TunnelLAN internalgroup-policy TunnelLAN attri...
Hey Ben,Thanks for the response. Given the dangers of enabling arp on non connected networks, is there anyway to secure it down to this specific IP? It doesn't appear that I can just set a static arp entry for the IP.
Here's the connections that establish when I try to hit the UI (80 and 443) from my desktop:asa# sho conn | inc 192.168.100.1TCP outside 192.168.100.1:443 inside 192.168.5.10:50565, idle 0:00:03, bytes 0, flags saATCP outside 192.168.100.1:443 ins...
Here's my network.Cable Modem --> Cisco ASA E0/0Cisco ASA E0/1 --> D-Link DAP-1522 APThe D-Link is running in bridge mode. I'm just using it for wireless and it's gigabit ports. The ASA is running a DHCP server so while all clients connect through th...
