Hi,The " Clean Access Server could not establish a secure connection to clean access Manager" error message is seen when the CAS is not able to communicate to the CAM via a secure connection. As specified in the error message, you need to check wheth...
Hi Mike,The next major release NAC 4.9 is expected to release by the end of this year.There is no planning for support on VM for NAC. You may contact your accounts team if you need any further information so that they can reach out to the NAC product...
Hi,The minimum switch IOS code required is Cisco IOS release 12.2(25)SEE. Please refer to the below link for more information on the switch support:http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/switch_spt.html#wp125327Hope this...
Hi Mike,Is the win 2k8 server running at 2003 functional level? If so, by default, 2003 functional level is not supported. You need to perform the below workaround for it to work at the windows 2003 functional level as per the below link:http://www.c...
Hi Felix,Looks like the below command is missing in the config:vpn-addr-assign dhcpTry adding the above as per the documentation:http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/vpnadd.html#wp999516Regards,Srilatha Vemula