Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have HSRP setup on a two Cisco 4510 switches (VLAN 199). I can only ping one of the physical IP addresses (.2), while the other (.3) returns a Destination net unreachable. The vlan has no ip redirects on it and I cannot seem to get that to go aw...
Did your issue start from the beginning or did it seem to start after implementing Virtual Ports? Just trying to understand how you found the issue and when it seemed to start.
Thanks Nicholas.
We are encountering the same types of issues with Write Performance and RX Pauses. Are Read Performance is fine. We have the Chelsio T3 cards as well using SCOS 6.7.05 and have talked to Dell Compellent about this and gave them the Reference numbe...
Reza,That's what I thought as well and both ACLs are exactly the same. I even added the permit ip 10.2.199.0 0.0.0.255 10.2.199.0 0.0.0.255 statement hoping it would resolve the issue. This VLAN is used for Cisco ISE, so that is why the Access-Lis...
Reza,Yes. If I remove the Access-Group off of Switch-02, then the replys start working. I have the same access list on other switches and everything seems to work just fine. Here is the Access-List: 10 permit esp any any 20 permit udp any an...
