About Alejandro Rivera

Alejandro Rivera · 08-07-2015

Hello, Straight to point, IOS allows route-target configuration as "0:N" format, but the IOS XE and XR wont allow that such configuration, supporting only 2-byte AS starting at 1 and 4-byte AS. Output:-------------------------------------------------...

Alejandro Rivera · 05-27-2016

Hello, First of all, Great Document. Now, i've been trying enable VPLS with BGP autodiscovery and BGP signalling between an ASR920 and an ASR9010 (as Route Reflector), i see the BGP l2vpn vpls information being shared between them. I have another AS...

Alejandro Rivera · 04-29-2016

Hi Xander, Thanks again for this information. Regarding this topic, an issue has come to our attention, where we have two ASR9010, which transports PW traffic for CESoPSN services from connected ASR903 devices. The problem is that no load-balancing ...

Alejandro Rivera · 03-22-2016

Hello Xander. Thanks, Awesome post. I have a question regarding the behavior of a certain classification template on an ASR9010 platform, which is not allowed to be committed, stating a semantic error. The thing is, this template is already applied ...

Alejandro Rivera · 03-22-2016

Hello Xander, Thanks. Awesome post. I have a question regarding a certain behavior on a ASR9010, where the following class-maps cannot be committed. This class-maps have been applied to ASR903 platform, without any problem. Please let me know If th...

Alejandro Rivera · 08-12-2015

Hello Peter, Thanks for the help, it was quite accurate. We did an upgrade to the ASR903, from 3.14 to 3.16, which delivered the solution. As an observation, version 3.10 allows this configuration too.Now, the issue persists for the IOS XR. Thanks ag...

Member Since	‎03-15-2013 10:15 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	3

User Statistics

User Activity

IOS XR/XE Route-Target support "0":N format

Hello,

Hi Xander,

Hello Xander.

Hello Xander,

Hello Peter, Thanks for the