About brutzelhutzel

brutzelhutzel · 03-19-2013

Hello@allI try to do the following:- WLAN with VLAN 10 and inter-vlan disabled- LAN-Port 4 with VLAN 20 untagged and inter-vlan disabled- VLAN 1 & 10 are excluded on LAN-Port 4Why can I still ping from LAN to WLAN => I can ping from LAN-Port 4 to the...

brutzelhutzel · 12-03-2012

hiI have some problems setting up a wlan guest connection over a separat vlan. My target: WLAN SSID "guest" which is a Member of the VLAN 10 should connect over two Switchs to a Router to the internet as following:RV180W WLAN-SSID guest [VLAN10] ==> ...

brutzelhutzel · 03-25-2013

I think the problem is, that there is automatically dynamic routing between WLAN and LAN Ports. The Routing-Table shows no static Routing, only dynamic. Isolation chance nothing.Can I deactivate dynamic Routing? The target is, to Route 4 WLAN with th...

brutzelhutzel · 12-10-2012

Behind the WAN Port, there is the Server and the Internet-Router. But I dont want that the VLAN10 can reach both, the Internet AND the Server. VLAN10 should only reach the Internet. But if I loose the tagging after the WAN Port, how could I prevent ...

brutzelhutzel · 12-04-2012

Hi TomThanks for your Input, unfortunately it's still not working. I have still access to everything with the VLAN 10. You're sure, that the Cisco-Router route the VLANs too? so from WLAN (VLAN-Subnet) 192.168.100.x VLAN 10 to the WAN-Port 192.168.10...

Member Since	‎12-03-2012 08:37 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

Cisco RV180W still problem with VLAN

RV180W Vlan Problem

Re: Cisco RV180W still problem with VLAN

RV180W Vlan Problem

RV180W Vlan Problem