Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi There folks, hopefully a quick & easy one for someone to answer:In the process of an MST migration, and referring to various components in the following doc - http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example0918...
Hi Everyone,First post in the community, yey!Hopefully this will be a quick one to answer. I am making preparations to migrate from PVST to MST on our network (as we are slowly but surely encroaching on the 128 VLAN limit). All is going well with p...
Hi again Renan,Perfect - many thanks for that latest reposnse. I believe I have enough now to take this forward and proceed with testing!Thanks to both yourself and Giuseppe for your input in this discussion, was very much appreciated!Ewan
Hi Renan,I believe I follow. If we compare what you say to the above topology therefore, all STP/MST instance information will be the same on all switches i.e. instance 1 for example could be defined as having 10,11,20 & 2000-3000 accross the board....
Hi again Giuseppe,Based upon what we have discussed, I have threw together a quick theoretical topology for the sake of this discussion. As you can see, I have placed a vlan block of 2000-3000 into instance 2 (this of course is subject to change and...
Hi again Giuseppe,Again many thanks for taking the time to respond - should have you on speed-dial! Sounds like some of these considerations havent been taken into account in my proposal - back to the drawing board it is then.Thank you for the input...
Hi Giuseppe,Perfect, many thanks for the reply! Puts my mind at ease!The method you describe about provisioning within MST is also really useful - will definitely be of help in the event that future vlan changes are necessary! I'll be sure to check...
