About patrick.girigorie

patrick.girigorie · 10-30-2013

Hi,I'm checking if some can help me out with a specific configuration.We are deploying the Cisco ACS in our network and have configured for the Authorization AAA to our AD.Now what we want to do is to give the technician normal access for monitoring ...

patrick.girigorie · 11-19-2013

This didn't seem like it was design for one user to get all the priv for Show command. So we decided to use two users instead one with priv 15 with no wr mem or conf t and another with priv 15 with no restrictions.ThanksPatrick

patrick.girigorie · 10-31-2013

Jatin,Hope it's clear the image.Just changed the enable to local only.Patrick

patrick.girigorie · 10-31-2013

Jatin, Ok almost there it is working but I cannot get the show run to work when in view-only and additionally the configured enable password on the router is not working anymore.Can you help with this?Patrick

patrick.girigorie · 10-31-2013

Hi Jatin,Yes of course:See below.aaa authentication login default group tacacs+aaa authentication enable default group tacacs+ enableaaa authorization config-commandsaaa authorization exec default group tacacs+ localaaa authorization commands 15 defa...

patrick.girigorie · 10-30-2013

Hi Jatin,Thanks for the reply, Yes i have tried this but the problem that I want the limited access engineer to make use of the enable password for the to gain access to the conf t.So same user who normally has limited access will change his priv le...

Member Since	‎03-03-2006 11:16 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	8

User Statistics

User Activity

ACS configuration for Authorization

ACS configuration for Authorization

ACS configuration for Authorization

ACS configuration for Authorization

ACS configuration for Authorization

ACS configuration for Authorization