Hi,we have a WLC 2504 with 7.4MR2 and our Cisco Prime Infrastructure 2.0 sends email alerts about every 30 mins that WLC becomes Unreachable and then reachable after about 5 mins. This is an anchor controller. Do you think this is a Prime issue or a ...
Hi,I have to install a new Virtual WLC running 7.4 with 15 2600 APs. I don't understand if I have to manually download a recovery image on the APs in order to register them on the vWLC.I've read something about that the vWLC is not able to push the s...
Hi,I have an MSE 3355 running 7.4.100.0, Cisco Prime Infrastructure 1.3.0.20 and 6 wism2 running 7.4.100.0.MSE was correctly added to Prime and assigned to maps and controllers. Context Aware Service is Enabled and Up and I have a permanent license i...
Hi,thanks for your answer. In our case we don't use service port to reach DMZ. Maybe this workaround is also needed in Guest tunneled via Management interface? Thanks Francesco
Hi,I really don't understand the problem resolution. Do you mean that, in order to implement Guest-Anchor solution we have to define specific routes to Anchors from the foreign management?I'm asking because we are experiencing problems with anchor in...
Hi Scott,We cannot check if wireless have problems because currently we haven't any user who are using Guest SSID tunneled to DMZ. We've tried to delete WLC from PI and then adding it again. Now we are waiting for The same alarm. If this workaround s...
Thanks for your answer, you're right but WLC starts to have this kind of problems last Sunday (without any network change). We've never encountered connectivity problems before. If the problem reside in switchport configuration I think that we would ...
1197 Po1197(SU) Eth NONE Eth198/1/29(P) Eth198/1/30(P)zsw-014f-224# sh run int Eth198/1/29!Command: show running-config interface Ethernet198/1/29!Time: Tue Mar 4 10:29:29 2014version 5.0(3)N1(1c)interface Ethernet198/1/29 description ...
