About alexander.milyar

alexander.milyar · 03-12-2013

Hello cisco experts!I've got some problems with STP at network due to migration from old non-cisco network switches to cisco switches.It's not an issue while I keep network loopfree. I'm migrating from old network. But at some moment I had to turn of...

alexander.milyar · 03-25-2013

glen.grant написал(а): If you want to speed it up even more instead of using portfast use the "switchport host" command on every user switchport which turns on portfast and turns off trunking, channeling negotiation and a couple other things. Act...

alexander.milyar · 03-25-2013

Checkouthttp://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00800b1500.shtmlBecause PortFast is enabled, only 1 second passed before STP started forwarding (instead of 30 seconds).So there is only 1 second of portfast opera...

alexander.milyar · 03-14-2013

Any ideas? Is it something by design with 2960S stacks?

alexander.milyar · 03-13-2013

And rate my first post as right answer too, because it is directly right answer about destroying port-channel and this helped. Other guys that will read this thread will be confused about question and right answer...

alexander.milyar · 03-13-2013

Nice to read that all works well.It's not good to set priority 0. Because other switch with priority 0 but lower mac-address may became root switch.And also if you will need to move to another root switch smoothly after a time - you can't, because yo...

Member Since	‎03-12-2013 02:46 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	11

User Statistics

User Activity

2960S stack and STP problem - how it correlates?

STP Portfast forwarding delay

STP Portfast forwarding delay

2960S stack and STP problem - how it correlates?

Re: "triangle" switchs topology

Re: "triangle" switchs topology