Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Mohamed,You are right you can use either a TFTP or FTP to copy the image that is not a problem.Instead of using the (config)#no boot system disk0:s72033-ipservicesk9-mz.122-18.SXF9.bin, we can use only (config)#no boot system to clear all the boot...
Hi, very welcome.On Catalyst switches all the modules are hot swappable so you can put it in and take it out with the switch up and running with no problem.Regarding the IOS upgrade, you see sometimes sup-bootdisk and other times bootflash, this is b...
Because of the ios image name you have a sup720. You have to upgrade the switch because the current doesnt support the line card. Upgrade to 12.2(33)SXH2 or newer and the line card will work fine. The one you say (SXH8) is ok. Sent from Cisco Technic...
