About Eugene Cheng

Eugene Cheng · 01-04-2011

Hi, I am trying to configure the auto qos for the IP communicator (auto qos voip cisco-softphone) but am unable to find the configuration.I have checked the IOS version release notes and the command is not listed, would anybody be able to let me know...

Eugene Cheng · 11-24-2010

Hi,I have a issue and this is between two companies. Company A and Company B.Company A is using IPT with MGCP gateways.The gateway has a PSTN E1 and also a E1 that connects to a Right Fax server.Users have an application that faxes through the Right ...

Eugene Cheng · 01-05-2010

Hi all NetPro-ers,I am encountering a troublesome issue this week, where our MGCP gateway was working fine and all of a sudden, the incoming and outgoing calls stop working. When i do a debug ISDN Q931, and dial incoming to an IPT extension, i do not...

Eugene Cheng · 03-07-2009

Hi netprotians,Can I ask if anyone has tried connected IP phones or ATA to a DC power supply.From the Phone data sheet (E.g 7945 link below), it mentions that the power cube is a AC power supply and not able to connect to DC. But would anyone know if...

Eugene Cheng · 10-08-2008

Hi all,I am trying to set up some public phones in a site and would like to explore if it is possible to restrict the time of a connected call. This is to prevent users from making calls for too long a period.Example, a user goes to the IP phone and ...

Eugene Cheng · 01-01-2014

A genius colleague found the resolution...We had this issue too and he found that the firewall was set to multiple mode.To resolve, do a "Mode single" to change back to single mode and reload.It would go back to the normal firewall config.HTH

Eugene Cheng · 01-05-2011

Thanks, got it.Cheers,Eugene

Eugene Cheng · 01-05-2011

Hi Pierre,Thank you for your quick response.Would you be able to show a link where this is mentioned?We have been searching up and low for all the cisco docs, and kept finding this configuration, yet this is not configurable till 2011.Thanks man,Euge...

Eugene Cheng · 09-14-2010

Hi,Yea, sorry I didn't update.I was able to resolve the issue.In the MGCP interface setting, the Call routing information - Outbound Calls,-Called party IE number type unknown- Called party IE number type unknown- Called Numbering Plan- Callikng Numb...

Eugene Cheng · 03-09-2009

Upz. Anyone? Thanks!Eugene

Member Since	‎07-31-2008 02:14 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	24
Total Helpful Votes Received	18

User Statistics

User Activity

Can't find "auto qos voip cisco-softphone" command

Strange Fax Issue

ISDN E1 issue on MGCP gateway: Message type not implemented

DC Power on IP phones/ATA

Time Restrictions in the IP phones

ASA boot from TFTP but IP address command is missing

Re: Can't find "auto qos voip cisco-softphone" command

Re: Can't find "auto qos voip cisco-softphone" command

Re: ISDN E1 issue on MGCP gateway: Message type not implemented

Re: DC Power on IP phones/ATA