Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Generally, a "Catastrophic Error" is a problem with the Windows operating system itself!To rule out the Cisco Aironet drivers, re-download the latest drivers, and try installing them again.If you continue to get the "Catastrophic Error", then your Wi...
Basically, your outbound access list 140 is not configured correctly. There is no permit statement, to allow any traffic out of your network, and as you know, at the bottom of every access list is an implicit "deny ip any any". When you are telnet o...
If trees have grown tall enough to be in the line of sight, then you will deffinitely have problems. The line of sight must be unobstructed.You should have a sight survey completed, in order to make sure that there is no obstructions.The inactivity ...
The following link explains the TCP Intercept command:http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/secur_c/scprt3/scddenl.htmWhen configuring TCP Intercept, you specify an extended access list to use for source and destinat...
It sounds like you are either having radio interference (causing intermittent or slow connectivity to the switch segment, as indicated by your intermittent pings), or that the bridge radio has not been configured for optimum performance.For radio int...
