Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All ,
We have completed implementation of Firesight and 2 x FirePOWER 8120 with active/standby mode and everything working as expected .
The client wanted to enable bypass mode, unfortunately bypass mode will not support with HA , we need to re ...
Hi All ,I have an issue with static NAT on ASA 5520 Version 9.1(2) firewall.Configuration as below interface GigabitEthernet0/0 description outside nameif OUTSIDE security-level 0 ip address 10.x.x.x 255.255.255.0!interface GigabitEthernet0/2 descrip...
Hi ,I am using ASA 5520 version 9.1(2) and configured the static Pat to access the internal server with the specified port from the public ip address (5.x.x.x) , able to Telnet with port (telnet 6.x.x.x 8100), but cannot access the server from the 5....
Dear All ,We are facing some issue doing an redistribution on nexus os 6.1 ospf to bgp redistribution but unable to see the ospf routes in BGP. but BGP to ospf redistribution is working fine. Pls find the config below... any help..router ospf 1 rout...
Hi Anupam , I have tested ACP export policy on Python Version 3.9 , working as expected . could you please provide the script to export pre filter policy rules . B.Regards Sameer .
John , It seems issue on ISP , used another public ip address and working fine..Karthik , this data center belongs to the ISP and they provided the private IP address to configure on the outside . sorry I have no more information to explain ,don’t h...
Hi Karthik , you're right , trying to accessing from outside ,ISP provided the private ip address to connect their device , we have 30 Public ip address , some of them used and working .
modified the access- list with anyaccess-list OUTSIDE_access_in line 27 extended permit ip host 76.x.x.x any4 .. but no luck I have doubts there are lots of existing Nat rules , it will make any issue ?
