Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Expert, I was doing MPLS VPN LAB in which I have 1 customer having 2 sites connected through MPLS VPN. now on both end PE router I use different RD value instead of same like on PE1 RD is 1:1 and on PE2 RD is 2:2 and I am running BGP routing proto...
i have one query releated to OSPF forward address for external routes some times its 0.0.0.0 (FA) some time its next-hop ip address i read few docs on cisco there they stated few conditions on the basis of that FA decide is it NON zero or zero FA add...
Hi Vinit,Thanks a lot for clearing my doubts .i really appreciate your effort.so just becoz there is different RD value and when we import the prefixes with respective RD in one vrf to other. show output always tell how do we get this route into bg...
Hi Vinit,Did you checked my comment where I said when we use same RD on site then why global is not listed for next-hop. but for different RD it list global after next-hop address.
Hi Vinit,I just lab same topology. this time I kept same RD value which is 1:1 on both PE routers and this time show output of command is different than what I post earlier have look.PE1#sh ip bgp vpnv4 rd 1:1 33.3.3.3/32BGP routing table entry for 1...
Hi Vinit,Thanks mate, now I am getting bit.so let me tell what I understand. prefix 200.1.1.1/32 is what we learned from Customer 1 site 2 into PE2 vrf okay, now on PE1 we import that route into site 1 vrf has RD 1:1.so here global means 200.1.1.1/32...
Hi Vinit,First of all thanks for reply,second sorry mate i couldn't get your second question response.can u elaborate bit more.what due mean site 1 imported prefix into site 2 vrf will not show "imported path from" and (Global) .here i would like t...
