I have 2 routers (A and B) connected via wireless link.Router A:interface FastEthernet0/0 description Wireless Connection ip address 203.115.220.1 255.255.255.224 no ip proxy-arp half-duplex no cdp enable!interface FastEthernet0/1 description Connect...
I have 2 routers connecting each other via LAN. Each router has 2 ethernet ports. Router A and Router BRouter A Config:interface Loopback0 ip address 192.168.1.1 255.255.255.255!interface FastEthernet0/0 description Internal Connection ip address 192...
My problem is like this:I have 2 network connected via wireless Point-to-point AP 1 and AP 2.I have 1 cisco 2651XM router connected to Catalyst switch A ana also one AP. 1Remote side:I have one notebook connected to switch B (catalyst 2950) as well ...
Hi,Anybody has any experience in using ISDN PRI for Internet link backup? I am using cisco 3620 with 1 serial link with 2 Mbps and 1 PRI ISDN module. Thanks
I will suggest you to use GRE tunnelling, but, the condition is both sites has to use Cisco router IOS 12.1 and above.1. Create tunnelling interface:-> In EXEC mode, int tunnel 02. Tuunel source and destination3. select the tunnelling mode4. attach t...
istt_affin_router#s ip ospf Routing Process "ospf 100" with ID 203.115.220.248 Supports only single TOS(TOS0) routes Supports opaque LSA It is an autonomous system boundary router Redistributing External Routes from, connected, includes subnets in...
Yes. The following is what I am getting...1d01h: OSPF: end of Wait on interface Ethernet01d01h: OSPF: DR/BDR election on Ethernet01d01h: OSPF: Elect BDR 203.115.220.2491d01h: OSPF: Elect DR 203.115.220.2491d01h: OSPF: Elect BDR 0.0.0.01d01h: OSPF: El...
