Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Can someone assist with this issue. I must be overlooking something, so I'm here. I have a server connected on the outside of my PIX520. I can start a connection from the inside to the server. But from the server to the inside, I cannot start ...
Hi All,I'm trying to use the object-group command to permit all clients to access a Web Server using https. Here is what I have is this correct.object-group network HTTPS_Host network-object host 10.10.10.20 network-object host 10.10.10.30 network...
Does anyone know of or heard of how to save the PIX config to a tftp server.Unlike the routers where you can directly save the running or startup config to a tftp server. Thanks in advance.
Can someone who is accessing a pix through a browser provide me with some assistance. I am running Cisco PIX Firewall Version 6.1(1) withCisco PIX Device Manager Version 1.1(2). When I launched the brower wth the IP of the inside interface I got "Th...
Thanks for the suggestion. That worked. Is there a shorter command that would specify several subnets at the same time. Or can you point me to the documentation.Thanks again.GS
I did not get the PIX as yet so I was diong this ahead of time. Some one told me I couldn't. I could not find any docs on CCO with this info.I didn't know it would take the keyword any. Thanks for your help
Remember there is an implicit deny at the end of an access-list. If this is the router will only execute this line and also deny all other traffic whit the implicit deny as mention before. So you will have to add this command access-list 110 permit i...
