About newinnovations

newinnovations · 03-27-2013

I have an ASA5510 that is connected to outside for WAN, inside for LAN (10.22.254.0/24), and a iSCSI switch plugged into Ethernet 0/3 (10.22.244.0/24). I can ping the Eth0/3 interface (10.22.244.1) but I can't ping across that interface from WAN or L...

newinnovations · 12-24-2012

Hello,I have 3 Cisco SG 200-50 switches ithat I'm using for a new set up. The 3 switches plug into a SonicWall appliance for routing and Internet access. I would like each SG switch to be a separate VLAN (ie. VLAN 10, VLAN 20, VLAN 30).So I have my m...

newinnovations · 04-11-2013

# packet-tracer input inside icmp 10.22.254.134 8 0 10.22.244.5 Phase: 1Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Information:in 10.22.244.0 255.255.255.0 backupPhase: 2Type: ACCESS-LISTSubtype: Result: ALLOWConfig:Implici...

newinnovations · 04-05-2013

I can't get there from the inside (10.22.254.0/24) or VPN (10.22.22.0/24) to ping 10.22.244.1 network. source = 10.22.254.0/24 or 10.22.22.0/24 and destination 10.22.244.0/24Neither work

newinnovations · 04-03-2013

I ran both of those commands and still cannot access/ping.

Member Since	‎12-24-2012 06:45 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

Multiple subnets on ASA 5510

VLANs with DHCP on SG 200-50 switches

Re: Multiple subnets on ASA 5510

Re: Multiple subnets on ASA 5510

Re: Multiple subnets on ASA 5510