Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We’ve introduced several Citrix NetScalers into our DC environment. Multiple connections between the NetScalers and our NX-OS switches (N7K VDCs, N5K access, etc.) are up and fine without trouble. We have a couple of access ports from a C6K up as wel...
We recently experienced an issue with our WAE-7341 where the fail-to-wire mechanism didn't perform as expected, which has generated a couple of questions. I already have a TAC case open, but our engineer has left on vacation and we probably won't see...
I've confirmed that this is an issue with the NetScaler. This morning I looped up interface 1/5 on both of their NetScalers and they were dark. I moved the SFP from 1/5 to 1/7 and was able to hard loop their interface. I reconnected the fiber jumper ...
Yep, Tx/Rx are fine. We can't hard-set speed, but we can turn auto-negotiation off, which is more or less the same. Our side came up, but his remained down. However, his end was still set to auto/auto, so that was probably a wash. I'm going to have ...
It's an SFP, so I can't hard-set speed and duplex, but I can disable negotiation. That forces my side up, but his side remains down. The NS can set speed and duplex, though, so I can try and disable negotiation on my side and have him hard-set to 100...
I wanted to try a USB transfer myself, but for the life of me could not find any information on how to do it. Of course the OS is different on wireless controllers, so it wasn't as simple as "copy xxx xxx" and the transfer commands didn't have an op...
Good point...I checked our two unit's serial numbers. They are pretty far apart. One is FCW14* and the other is FCW15* - the FCW14* S/N is the one with the problem.
