Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, we have an RV082 switch router with 8 ethernet ports, actually it serves 8 lan devices with DHCP address assignment (router is used as switch/router and DHCP server). Now we need to increase the number of LAN devices connec...
Hi all, i saw older discussions over WOL and RV082/RV042. As router blocks broadcast packets from internet to lan, to make WOL work, i should change router's ARP table using telnet, probably with V1 and V2 versions this action was possible, but tryin...
Unfortunately you cannot send a broadcast packet from outside lan, becouse many routers discard it. In this situation ARP conversion is needed as you said. These routers are small business, not home products, so buyer expects they have at least WOL a...
To make WOL work on RV082 I didn't change ARP entries, it's possible (but would be a strange behaviour!) that this router stores ARP table for more time than RV110, but I think it would be logical that routers store ARP entries at min. for the full l...
Check client lease time in DHCP settings (set this value to 24 hours or more), and when you turn your pc in sleep or hibernation mode, check port ethernet led on your router (is it on for only 5 seconds after shutdown and then switch to off ?)Problem...
Try to use this address:IP Address: 192.168.2.1Broadcast: 192.168.2.1Instead of:IP Address: 192.168.2.1Broadcast: 192.168.2.255Surely that problem regards broadcast address that cannot be used outside LAN (including VPNs).The application I use on my ...
Yes I can ping my router and I can connect to configuration page of my router from internet, becouse my provider gives a public IP address. Routers normally don't respond to ping on internet port for security reasons (due to their default configurat...
