Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In our little lab I have been looking at Active/Active running for two ASA55xx-X, called FW01 and FW02. I seem to have some anomalous behaviour with the "Active" lights. I'm using asa942-11-smp-k8.bin.
Active/Active requires multiple context mode so ...
Has anyone successfully configured raw DHCP options in Catalyst IOS? If so, what options and what version of IOS?Shortened version, cannot post the full version:"This message can not be displayed due to its content."
I did a sh inv on my newly built 2x Cat 3750X + Cat 3750-24FS stack running 12.2(58)SE2). It only showed 3 of the 4 Cat 3750X PSUs - Sw1 PSU 0, Sw2 PSU 0 and Sw2 PSU 1.Switch#sh invNAME: "1", DESCR: "WS-C3750X-24"PID: WS-C3750X-24T-S , VID: V02 , ...
Hi Phil. Thanks for your reply. I've used ASA5525-X in Active/Standby for a few years but never Active-Active/multiple context which has been specified by the senior architect in this application. I'm quite happy with the behaviour up to the point wh...
OK, it turns out that these commands do not force the options to be sent; they define values for these options to be supplied IF requested by the DHCP client. Our Windows devices did not ask for any of these options. A Linux client did. Thanks to al...
Also tried option19 hex 01 on 3750 - no successAlso tried option 46 hex 01 on 2801 - this worked but like option 15 this is an option supported by a specific command anyway ("netbios")
Let's see if I can actually post this info this time.We have tried option 26 on:Catalyst 2960 IOS 12.2(35)SE2 LAN Base k9Catalyst 2960 IOS 12.2(55)SE4 LAN Base k9Catalyst 3750 IOS 12.2(55)SE4 IP Base k9Catalyst 3750X IOS 12.2(58)SE2 IP Base k9and, ou...
