Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm struggling to set up an IKEv1 IPsec connection from a 3G router to an ASA 5506. The same VPN with a 5505 works perfectly.Among other things, sh ver shows me this message: The Running Activation Key feature: 2 security contexts exceed the limi...
Hi,
I'm setting up an ASA 5506, and I'd like to use its ports like the ASA5505, so I use BVI1 interface.
I've set up a VPN from my site to the site where the ASA is located.
It works, I can access remote devices, but when I try to access the firewa...
Hi,
I have a 5505 with ios 9.1(6), that's usually used for internet, i.e. clients on inside can surf internet according to ACLs. All is working.
Then I have a Tomcat server listening on port 8080 that needs to be exposed on internet.
I'd need to ...
Hi,I've a network that for its lan part is made of a single C class.Servers are in one place, a client (10.2.0.201) is in a different place, connected to the central site via two ubiquity nanobridge set in bridge mode.There are users that connects vi...
Hi all,
I've two internet lines, each one with a static public IP, sat IP1 and IP2, supplied by different ISPs.
Each line is the outside of an ASA firewall.
The inside of each firewall is on the same lan segment, say it's 10.0.0.2 and 10.0.0.3
I hav...
There is no such command: MyFw# show context
^
ERROR: % Invalid input detected at '^' marker.
MyFw# show co
MyFw# show co?
community-list compression configuration configuration
conn console-output ...
Are you sure?
I have a working VPN from my office to the location of the ASA5506. From my office I can access all devices on the LAN whose inside is the ASA 5506 inside(s), i.e. the 5506 BVI1.
Usually on 5505 to access them from remote VIA VPN (n...
Yes, servers and clients, including those connected via the ubiquity nanobridges are on the same LAN, inside, i.e server is 10.2.0.1, remote client connected via ubiquity nanobridge are 10.43.0.201, 202 etc.Remote clients connected via VPN client get...
