Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
First, let me give you a little background on what is happening.We are deploying a front-end Outlook Web Access exchange server. The domain controller, exchange server and OWA server are all running Server 2003. The OWA server is on a DMZ network on...
I'm not the original poster and maybe it's better to start a new topic as this one is already a couple of years old. But how would someone go about doing this?
My tunnel interface numbers are mostly the same as evidently they based on the physical in...
Also we were trying to use the cipher GCM-AES-XPN-256 for MACsec. We have tried to bring up Expressroute Direct in a second location and we were having the same trouble even after Microsoft Support has said that SCI is enabled. After further investig...
Thanks for the reply trondaker. It turns out that while Microsoft Azure support had said that they had enabled SCI they actually had not. Getting them to admit to this was very difficult. Once SCI was enabled on their equipment everything started wor...
I am having a similar issue but upon having Microsoft enable SCI on their end the MKA is established and the status is showed as "secured" sh macsec mka summary Wed Jul 28 15:38:02.371 CDTNODE: node0_4_CPU0============================================...
From the document Interface and Hardware Components Configuration Guide "Port numbers 25 to 32 are active as 100 GigabitEthernet interfaces, by default. The corresponding 40 GigabitEthernet interfaces for these ports become inactive. To enable the 4...
