Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking for documentation that details the configuration steps needed to configure Port Channels and Trunking on a Cisco Catalyst 4500 and other Catalyst models to support the UCS 6100 Ethernet Uplinks. I have found all kinds of documents on creating...
Thank you for your submission. This workflow works sometimes but not all as I am receiving an error. Here is the error from the log; "Sep 28, 2016 16:39:02 PDT Error occured at line # 278Sep 28, 2016 16:39:02 PDT [Line#278] var netComment = jsonRespo...
Negative, you just need to slide the disks out of the blade a little. Another option is to possibly create a bios policy and see if there is a setting to turn off the LSI controller.
The issue is that the "No Local Storage" setting in the policy is looking for a blade with no local storage. You can create a raid set if there are still local drives in the blade. In order to boot from SAN you just need to make sure your Boot Policy...
No, it is not possible for just an FC port to be configured with an expansion module on the 6120. This is only possible by using the unified ports on a 62xxSent from Cisco Technical Support iPhone App
