Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Want to do a new/clean install for AIR-1815i FLASH. How can BTLDR be used to format the FLASH or remove all the files. Then procedure to use BTLDR to reinstall the files to FLASH. Do I use the large .zip or smaller .tar when reinstalling the FLAS...
RV340W (using firmware version 1.0.01.18) settings does not allow me to change or disable the default username "cisco" leaving it vulnerable to an attack. Will there be a fix for this?
Regards,
The WAP581-A-K9 V01 (Firmware 1.0.0.7) access point is slow moving data across the LAN and cannot figure out why.
Have perfect wifi speed but slow moving data. Using IPv4, not using IPv6 (no option to disable in GUI)
VLANS are TAGGED. Does not give a...
Two RV340W were chosen since it is the latest model for small business and would be replacing RV220W.
Cannot find information to block MAC Addresses (MAC Filtering) so will NOT communicate WAN in or out. Option is available on the RV220W.
Cannot find...
RV130 Issues with firmware 1.0.3.28Uprading equipment from RV180 to RV130 and not able to set things the same.1. Firewall custom service or port setting for "wan to lan" and "wan to dmz" will not let me block to "any"but asks for specific "to" ip onl...
I have no suggestion on how to fix the issues with the WAP581. My opinion is maybe amateur software writing. Default out of the box works. Once make any changes to it will then slow down and only thing to do next is to disable wireless N and 5G. Woul...
I no longer had the problem if I did not change the default native vlan from vlan1. Replaced product with AP 1830i mobility express. Also needs native vlan but no issue if changing it. Good luck
Anyone else having a throughput issue. Cannot use the 5ghz radio and the 2ghz wireless N has to be disabled to get wireless G throughput. If so what is the fix besides disabling the 5ghz radio and limiting 2ghz radio to wireless G?
Thank you for your time in this matter. Previous Cisco routers and even some CURRENT models, including current WAP devices allow the default user name to be modified. Would be nice if Cisco would let end purchasers/users know if features are remove...
