Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear software developer team for Cisco VPN client,Dear NetPro Forum Members,we want to let you know the Cisco VPN Client is working for in Windows Vista RC1 with a little manual fix.Referring to VPN Client 4.8.01.0410, (released 15-JUN-2006)and Wind...
My boss has told me to monitor the PIX firewall for our company and write a monthly report. So I’m sitting for hours in front of the PIX staring at the green power light. Our firewall seems to be OK. The green light is constant on. ;-))I’ve read ...
I have not seen the full config, so this is only a guess:
try if this is missing: management-access inside
This will set what IP to use as the "from" address for traffic originating from this ASA device.
Depending on ASA model you have a management...
please see this example !interface Ethernet2 description physical interface to switch. the switch port is configured trunk mode VLAN ID 3 and 5 no nameif no security-level no ip address!interface Ethernet2.3 description VLAN 3 for proxy vlan 3 namei...
Hi, have a look at: Kiwi Syslog Daemon is a freeware Syslog Daemon for Windows. It receives, filters, logs, displays and forwards Syslog messages and SNMP traps from hosts such as routers, switches, Unix hosts and any other syslog enabled device.http...
Hi Angel,I think this example is what you are looking for. Remember the switch port must be configured in VLAN trunk mode and belong to both VLAN IDs. !interface Ethernet0 description connected internet nameif outside security-level 0 ip address ...
