About Gokul Varma

Gokul Varma · 01-20-2016

Hi, I am able to access this switch only from 40 ( 192.168.40.0/24 ) VLAN and am unable to ping or ssh into it from any other VLAN. I have pasted below the running config of the switch. Please advice what could be preventing the switch from being ac...

Gokul Varma · 01-26-2016

Thanks! That solution worked!! Thanks a lot for helping me!

Gokul Varma · 01-21-2016

Thanks Jon, Richard, I shall try deleting the other SVIs except for vlan 1 and shall try and report.

Gokul Varma · 01-20-2016

I am afraid the Cisco 2960 thatg we have does not permit us to add this command under config-if mode: BSL-BNG-S001(config)#int vlan 80BSL-BNG-S001(config-if)#ip defBSL-BNG-S001(config-if)#ip def?% Unrecognized commandBSL-BNG-S001(config-if)#ip ?In...

Gokul Varma · 01-20-2016

I shall try configuring the default Gateway as suggested , meanwhile here is the output asked for: BSL-BNG-S001#show vlan VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa0/3, F...

Gokul Varma · 01-20-2016

The switch is an L2 device and is the primary trunk link to a Firewall which does the routing. The routing has the default Gateway IPs ( .1 ) for all the VLANs. The Int Vlans were created as a means of troubleshooting in case of connectivity issues. ...

Member Since	‎09-22-2010 09:32 AM
Date Last Visited	‎08-01-2018 02:27 AM
Posts	12

User Statistics

User Activity

Unable to Access Cisco 2960 from all VLANs Except one

Thanks! That solution worked!

Thanks Jon, Richard,

I am afraid the Cisco 2960

I shall try configuring the

The switch is an L2 device