Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A client have 2 existing sonicwall devices with site to site VPN. Main site has UC540 with a dozen phones. The client want to have 2 SPA504g phones on the remote site behind the remote Sonicwall VPN. Unfortunatley SPA525s are not an option as per ...
Like to find out support via CCA3.1.1 and Pack 8.2.A client is inquiring about have inbound Fax to their main fax number (already part of sip trunk) to come via email instead of going to the UC540 analog port and to a regular fax machine.Any directio...
I need to setup a SPA525G with a UC560 implementation at a customer's remote site. The issue is the remote office is way out there and need to find a way to set it up manually. Looking for step by step manual directions for this.Any help would be g...
I have changed the phone type several times via CCA. Works great. The only issue is changing a 7900 phone with a different series. 7900 phones support octo lines. As long as the line is dual, you can change to anything. If changing from 7900 to...
Thank you for your help. I used the #1 solution. I called Cisco support and they told me that 10.1.10.0 and 10.1.1.0 both networks need to be forwarded. Instead of that, I did 10.1.0.0. Even with the DHCP giving 150-TFTP for 10.1.1.1, the SPA504 ...
This is a very good question. I nomally deply 7965 with the side cards. I have never used 7975, but it should work. Is the phone and both side cards powerd by two bricks or a different combination. I always use two bricks, even though you can po...
I am in a similar situation. The voice mail system of one of my client has died. I am in the process of ordering a new SIP trunk to be used with a UC560. But meanwhile I need to make the UC work with atleast 12 inbound pots trunks. Can I use two ...
