Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anybody come across any issues where PEAP clients lose their IP addresses on re-association?I have client configured for EAP-GTC talking to AP1200's. When the PC goes into suspend, the clients are forced to re-authenticate. This all works okay ...
Hello,I am trying to speed up the amount of time it take for a WLAN client using PEAP with OTP to authentication the WLAN.Currently, it can take up to 2 minutes before a user is prompted to authenticate. Is there any way of speeding this up?I know o...
I have been trying to upgrade some IBM T20 laptops running Win XP SP1 to support PEAP. The laptops have been operating without security and had the ACU loaded. Once the ACU is upgraded to 6.0, drivers to 8.30 and firmware to 5.20. from CCO, the set...
I have been trying to install a 350 PCMCIA card on a laptop running XP SP 1. However, I cannot get it to work reliably.I set up the XP networking profile for PEAP and GTC I set up the ACU for Host based EAP and Dynamic WEP.The process is slow to bri...
We have 350 APs running 12.02T1 software and 350 series Aironet clients. I am trying to set up PEAP authentication with SecurID and enable Dynamic WEP with MIC and TKIP.I am using multiple SSID's and VLANs to set up three network types:SSID 1 = PEAP...
Thanks for the response...I think your right, it is a combination of the problems...the windows boot up time is long, but we can live with thatThe delayed authentication issues happen at boot up and when the PC is re-authentication after being out of...
Thanks for your help...I have tried the following combinations on multiple machines:IBM T20 + MS XP + SP1 - Machines blue screens almost straightawayIBM T21 + MS W2K + SP3 (with Hotfix) - Works perfectly!IBM T21 + MS XP + SP1 - Works at first, but ha...
I have searched the microsoft website and only found the 802.1x hot fix for Win 2K which I have installed and tested on a win 2K machine. The patch for Win XP is the WPA upgrade.
I have been testing with PC running XP SP1.The driver package is the latest on CCO ACU 6.1, NDIS 8.30, Firmware 5.20.17.I have enabled broadcast key rotation on the AP's. Is this a 128 bit key too?I have installed the hotfix on a W2K machine, which ...
Tim,Thanks for that... I am going to try loading the Cisco Aironet drivers and ACU with a non-Cisco card, I will keep you posted!Did you use the Funk Odessey client with the Odessey server/Steel belted RADIUS or with ACS? I don't think Funk support ...
