Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My inquire is I am trying to understand why this works.I have 4 internal routers (2620) connecting directly to a switch (2900XL) the switch is directly connected to a server running OpenBSD 3.9. The server has 2 NICs it is setup as a bridge. The NI...
I having diffculty configuring routing between vlans I have configured.Setup:SwitchCatalyst 2900XL IOS 11.2(8.6)SA6Switch IP VLAN1 192.168.0.90Router 2620 IOS 12.3(15a) I have configured the vlans 1 thru 4 on the routervlan 1: 192.168.0.0vlan 2: 192....
Hi, The Server is setup as bridge to allow traffic to pass from one network to other network. No routing is done by the Server. This is done to watch different going from network 1 to network 2 and vice versa.Now I see where my error was, thinking ...
Yes in the orignal setup the inner_routers can ping NIC_1 of the Server.There is 15 seperate Vlans All the ports on the 2900XL are set to allow all the vlansThe internal routers are all in the same network range of 10.10.100.xxx. NIC_1 of the server...
