Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello allI'm currently developing different applications based on TAPI which work together with the callmanager infrastructure. Can anybody tell me how I can create an application which can monitor line states. A bit like what the webattendant does. ...
You are absolutly right. VPN implementation on ADSL cisco ADSL devices is a real real pain especially with PAT (overloading) . There is simply no good solution.I would appreciate implementing something like: ip nat inside source static [prot number] ...
As far as I know you don't even have to use a router. Just create a H323 client phone on the callmanager with the ip address of the client running netmeeting. Also setup netmeeting to use an gatway which should be the callmanager's address. This is g...
Hello, If you mean to display the name instead of the CLIP ID on the phone itself, my answer would be negative. The XML services on the phone do not allow you to do this ( as far as I know) . However this can easilly be accomplished by writing a litt...
Make sure that on your gateway (cisco IOS box) that routing is enabled. If not this will result in single way voice. Make sure the "ip routing" command is visible in the running config. This may sound very stupid, but you can easilly look over it, es...
