Dear Friends,I have a doubt regarding the firewalling concepts. lets say, I have a brand new firewall, with two interfaces (inside and outside). I configured IP addresses on both the interfaces, access lists for inside access and outside access, and ...
Hi,the firewall will never generate 10G log data in any situation. Here actually wasting a 10G interface. If possible use any 1G interface or a separate managemnet interface (100 Mbps) for this purpose. The maximum log size will be even less than an ...
Hello Jernej,You need to use the dailer interface ( in your running config i was not able to see the dailer config section) please use the below template to complete the configmultilink bundle-name authenticatedchat-script internet "" "ATDT*98*1#" T...
Hi,ACL optimization will find the double entries and it will try to combine the rules if possible. you will be able to see minimum of a 60% reduction in the ACLs after enabling optimization. There is no issues on doing this exercise on a production b...
You can enable ACL optimization , which will reduce the number of ACLs, and the FWSM will keep the optimized configuration separate than the normal running configuration. Then copy the optimized running configuration in to the running configuration u...
Hi, here with the ACL's you are permitting the traffic. but I hope there is no static translation to for this server.to access this server through telnet, execute the following command on the PIX,static (inside,outside) 192.168.1.1 192.168.1.1 netmas...
