Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Rick,For this situation I guess you would need to add NAT and ACL statements for both the Primary and secondary IP's.Whenever the Primary IP fails and the server fallback to secondary then, the ASA would start using the second nat statement for th...
Hi,Well you can either add one single switch as a host or the entire subnet under AAA clients on the ACS.Probably your colleague had the entire subnet defined on the ACS, hence he needed not add each host one by one. They must have been automatically...
Hi There,As far as the ACS 5.x is concerned, it's not possible to achieve thiswithout having the switch defined as a AAA client on the ACS.You need to define this under Network Resources >> Network Devices and AAAClients. And once you add this here, ...
Hi, No. Your TACACS traffic will kepp hitting the Default Device Admin andcontinue to work. The RADIUS traffic will keep hitting Default Network Access and they'llwork. I'll demonstrate what I mean here: Click on Service Selection Rules. Here you'll ...
