I need some help and clarification on this issue. I am in the process of upgrading the IOS on aSwitch from Upgrading of the IOS from c6sup22-psv-mz.121-19.E1a.bin to 12.2(18)SXD7b c6k222-ps-mz.12.2-18.SXD7b.The show version gives the followingROM: Sy...
What is the advantage of configuring "UDLD port" on gigabit interfaces on a Cat 6500 switch? The interfaces are part of a GEC and are also trunked.What is the advantage of having the command on or off.Do we really need it. ?
I need to clear the arp cache for 2 interfaces on a Switch. The Cat 6509 is running c6sup22-psv-mz.121-19.E1a.bin.How can I do this?And if I have to do it for all, what effect will it have on devices that are also connected to the switch?Thanks
I need to upgrade an IOS on a Switch to on a Sup2/MSFC2.The Cisco web site recommends c6k222-ps-mz.122-18.SXD7b.bin Release Date: 12/Dec/2006 IP LAN ONLY Size: 25878.11 KB (26499180 bytes) Minimum Memory: DRAM:256 MB Flash:64 MB Which DRAM does this...
Thank you. I got this email from Cisco. ..........It looks to me like you were trying to install sup memory instead of MSFC memory. MEM-S2-512MB is memory for the supervisor and MEM-MSFC2-512MB= is the memory for the MSFC. They aren't interchangeable...
So which one do I purchaseMEM-MSFC2-512M or MEM-S2-512M.We have a Supervisor 2 / MSFC 2 card running native IOS.If I do a remote switch command on the same show version I get the folloiwngremote command switch show versCisco Internetwork Operating Sy...
ThanksWhen you say counterpart interface, where is this. These connection are to NAS servers. Do they need to be enabled on the NAS servers as well. What is the impact if I remove them?Thanks
ThanksThese are copper interfaces not fibre. So is it necessary to include the command "udld port" on the interfaces? Could this be giving me DNS issues?When I do a Show udld I get the below:Port enable administrative configuration setting: EnabledPo...