Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Support, need your help to fix my setting. I have bought now the good 10GBFC Module for connexion between MDS C9134 and C9222i. the trunking is OK between the 2 switches. But we have Vsan with zone on each MDS but they cannot communicate. Please...
Dear Roman,I have set only un VSAN on each MDS Switch, with a zone also ans only Zonzset set on MDS c9222 and "activate it and distribute it".Now everything is OK.Thank a lot for your support.RegardsPboidi
Dear Roman,I have ceated VSAN3 on first MDS c9134 and put on it (a host fc1/3 and a Robot fc1/7, and on the other site I have a host (fc1/3 in VSAN4 on c9222i)which need to reach the robot on the first site.And then, I have the 2 peers (fc1/33 c9134 ...
Dear mikbrownI need your help to fix my setting.I have bought now the good 10GBFC Module for connexion between MDS C9134 and C9222i. the trunking is OK between the 2 switches. But we have Vsan with zone on each MDS but they cannot communicate.Please ...
Thank Mike, I want to know if Cisco have a module X2-10GB-LR used for interswitches link? I know that generally, people used DS-X2-FC10GB-LR module, what about X2-10GB-LR?Best Regards
Dear Support,Please I need your help to know something. I have two (2) 10 GB module (X2-10GB-LR)for interswitches links between two MDS 9134. Could tell me if I can use them like a FC module or not?Thank a lot for your support
