MDS 9134 Basic Config

[themasher]

Hello, I have 2 new MDS 9134 switches. I have connected them using the 10 gb ports. Port 33 on one to port 33 on the other and port 34 on one to port 34 on the other. The device manager still shows down. Do I have to configure these? If so can anyone explain the process or point me to a user guide.

[Michael Brown]

I know that on the 4 port 10GB line cards, you can use either 10GB FC SFPs or 10GB Ethernet SFPs. This was done to permit the use of DWDM gear that supported 10GB ethernet, but not 10GB FC.

[omer.kanse]

Dear mikbrown

I need your help to fix my setting.

I have bought now the good 10GBFC Module for connexion between MDS C9134 and C9222i. the trunking is OK between the 2 switches.

But we have Vsan with zone on each MDS but they cannot communicate.

Please find in attach my setting.

Waiting for your feedback urgently

[techcrazzy]

.