As a possible troubleshooting tip, I recommend they remove teaming and place the team IP address on each NIC (one at a time, while shutting down the other NIC), and see if they see a specific issue with a given NIC. This will help to show if there is...

There may be, but I would do some more checking first.Question: Can you post the output of a "show eth sum" for the upstream port channel connecting to this server?

No problemYou mention Active/Standby on the server, connecting to an LACP EtherChannel on the VSS, and this would be broken, as these are two different types of teaming. Both sides (the server and the upstream 6500's) need to agree on how they will u...

Hi Raymond,A couple of questions:1) Are you using HP C class blade enclosures or are these stand alone servers?2) If this is a blade enclosure, what are you using in the switch bays (pass-thru's, 3120's, 3020's, something else)?3) What hash type are ...

Hi Tuyen,I'm not quite sure what you are driving at, but it sounds like you want to find who is using certain IPs and how you can prevent them from using IP's that do not belong to them.If this is correct, the following might help:For finding out wha...