Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am working with the IDSM-2, We have Cisco 6509 with CSM & FWSM, We are planning IDSM-2 in Inline vlan pair mode and now i want to monitor the traffic which is coming through Outside Interface of the FW contthat is vlan160 in inline vlan pair mode ...
Hi,We have two sites DC & DR, with two 6509 and two FWSM.Data flow is Cloud----Extr RTR--- IntRTR---FWSM---MSFC---, with this we have Internet connection terminated on FWSM with multiple context,All the Incoming traffic is taken care by BGP at ISP en...
Hi,I am working with the IDSM-2, We have Cisco 6509 with CSM & FWSM, We are planning IDSM-2 in Inline mode and now i want to monitor the traffic which is coming through Outside Interface of the FW context ( Which is nothing but a VLAN A, VLAN B, Vlan...
Hi,I am done with the config (Inline VLAN PAIR), but i am not able to see any logs at event viewver.I enabled all FTP & MSN signatur but there is not logs for the same and able to access the internet services.any one can help me out to trouble shoot ...
Traffic is going through the VLAN but there is no logs on event viewer.I need a sample configuration with 6500---IDSM--FWSM. There might be a problem with 6500 configuration.Valn 160 is Outside interface of FWSM context and there is not traffic on vl...
This example shows how to enable system logging of interface state-change events on all interfaces in the system: Router(config)# logging event link-status defaultRef:- http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/comman...
No matter whether your network is small or big, you can place IDS any where in network, thing is what data you wana scan (Moniotor)and what IDS device you have!
