Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
1) login to the ASA and type#session 12) on the IPS prompt type #setup3) then fill up the setting based on the questions, and configure the management IP address.4) configur your PC or LAPTOP with IP address from the same subnets and connect through ...
I don't have VPN tunnel FTPserver--router1811--MPLS--router--FTPclientthat is my topology and because the ftp over ssl is encrypt the packets so the site does not want to use VPN.
thank you for asking, I did not try to use fixup but I found the problem when using FTP over SSL with ports 990 and 989, that will encrypt the control connection in the packet then when using NAT with FTPS (FTP over SSL) then the router will never re...
I Have the same problem with the NAtting FTP server using non standerd port 990 and it connects to the FTP client using the global addresses but never open the data channels b/c it use the local address even we tried to permit for the local IP addres...
